pmp-check-mysql-status -l $USER3$ -p $USER4$ ......

Archived Projects Percona Monitoring Plugins
#1

Hello there,

I have been trying to setup the nagios plugins to my monitoring server and I defined the following command on the remote server’s nrpe_local.cfg.

pmp-check-mysql-status -l $USER3$ -p $USER4$ -H $HOSTADDRESS$ -x Threads_connected -o / -y max_connections -T pct -w 80 -c 95

(Of course, I replaced the username, password and hostaddress with all the appropriate info.)

and I got the following output on the monitoring server. [TABLE]
[TR]
[TD=“class: dataVal”]awk: line 8: syntax error at or near )
awk: line 13: syntax error at or near if
awk: line 24: syntax error at or near exit
CRIT Threads_connected / max_connections (pct) = 1.986755[/TD]
[/TR]
[TR]
[TD=“class: dataVar”]Performance Data:[/TD]
[TD=“class: dataVal”]Threads_connected/max_connections=1.986755;80;95$;0;100[/TD]
[/TR]
[/TABLE]

can someone tell me how to fix it ?

Sorry, I am new to nagios.

Thanks for looking at my post and for your help in advance.

-D

#2

Please run the command manually using sh -x pmp-check-mysql-status … and show the excerpt of the output with awk errors.
Also what’s the OS?

#3

Hello Weber,

Thanks for your post. The following is excerpt of the output. Also, the OS is Ubuntu 12.04.

hostname:/usr/lib64/nagios/plugins# sh -x pmp-check-mysql-status

  • exec
  • STATE_OK=0
  • STATE_WARNING=1
  • STATE_CRITICAL=2
  • STATE_UNKNOWN=3
  • STATE_DEPENDENT=4
  • is_not_sourced
  • [ pmp-check-mysql-status = pmp-check-mysql-status ]
  • main
  • OPT_COMP=>=
  • [ -e /etc/nagios/mysql.cnf ]
  • is_not_sourced
  • [ pmp-check-mysql-status = pmp-check-mysql-status ]
  • [ -n ]
  • OPT_ERR=
  • [ -z ]
  • OPT_ERR=you must specify either -c or -w
  • [ ]
  • [ you must specify either -c or -w ]
  • echo Error: you must specify either -c or -w. Try --help.
  • exit 1
  • OUTPUT=Error: you must specify either -c or -w. Try --help.
  • EXITSTATUS=3
  • echo Error: you must specify either -c or -w. Try --help.
    Error: you must specify either -c or -w. Try --help.
  • exit 3
    hostname:/usr/lib64/nagios/plugins#

Thanks for your help in advance.
-D

#4

desmondkan, can you run the full command with “sh -x” to get the error with “awk” command, e.g.
sh -x /usr/lib64/nagios/plugins/pmp-check-mysql-status -l user -p pass -H somehost -x Threads_connected -o / -y max_connections -T pct -w 80 -c 95

#5

Sure … the following is the output.

username@hostname:/usr/lib64/nagios/plugins# sh -x pmp-check-mysql-status -l username -p password -H ip-address -x Threads_connected -o / -y max_connections -T pct -w 80 -c 95

  • exec
  • STATE_OK=0
  • STATE_WARNING=1
  • STATE_CRITICAL=2
  • STATE_UNKNOWN=3
  • STATE_DEPENDENT=4
  • is_not_sourced
  • [ pmp-check-mysql-status = pmp-check-mysql-status ]
  • main -l username -p password -H ipaddress -x Threads_connected -o / -y max_connections -T pct -w 80 -c 95
  • shift
  • OPT_USER=username
  • shift
  • shift
  • OPT_PASS=password
  • shift
  • shift
  • OPT_HOST=ip address
  • shift
  • shift
  • OPT_VAR1=Threads_connected
  • shift
  • shift
  • OPT_OPER=/
  • shift
  • shift
  • OPT_VAR2=max_connections
  • shift
  • shift
  • OPT_TRAN=pct
  • shift
  • shift
  • OPT_WARN=80
  • shift
  • shift
  • OPT_CRIT=95
  • shift
  • OPT_COMP=>=
  • [ -e /etc/nagios/mysql.cnf ]
  • is_not_sourced
  • [ pmp-check-mysql-status = pmp-check-mysql-status ]
  • [ -n ]
  • OPT_ERR=
  • [ -z 9580 ]
  • [ -z Threads_connected ]
  • [ / -a -z max_connections ]
  • [ max_connections -a -z / ]
  • [ pct = pct -a -z max_connections ]
  • [ pct ]
  • [ / ]
  • :
  • [ ]
  • NOTE=UNK could not evaluate the expression.
  • mktemp -t pmp-check-mysql-status.XXXXXX
  • local TEMP1=/tmp/pmp-check-mysql-status.khcnvL
  • mktemp -t pmp-check-mysql-status.XXXXXX
  • local TEMP2=/tmp/pmp-check-mysql-status.n1acml
  • trap rm -f ‘/tmp/pmp-check-mysql-status.khcnvL’ ‘/tmp/pmp-check-mysql-status.n1acml’ >/dev/null 2>&1 EXIT
  • get_status_variables /tmp/pmp-check-mysql-status.khcnvL /tmp/pmp-check-mysql-status.n1acml
  • [ ]
  • mysql_exec SHOW /!50000 GLOBAL/ STATUS
  • mysql -hipaddress -uusername -ppassword -ss -e SHOW /!50000 GLOBAL/ STATUS
  • mysql_exec SHOW /!40101 GLOBAL/ VARIABLES
  • mysql -hipaddress -uusername -ppassword -ss -e SHOW /!40101 GLOBAL/ VARIABLES
  • compute_result /tmp/pmp-check-mysql-status.khcnvL Threads_connected / max_connections pct
  • local TEMP=/tmp/pmp-check-mysql-status.khcnvL
  • local VAR1=Threads_connected
  • local OPER=/
  • local VAR2=max_connections
  • local TRAN=pct
  • [ max_connections ]
  • awk -F\t
    BEGIN {
    got1 = “Could not find variable Threads_connected”;
    got2 = “Could not find variable max_connections”;
    }
    $1 == “Threads_connected” {
    var1 = $2;
    got1 = “”;
    }
    $1 == “max_connections” {
    var2 = $2;
    got2 = “”;
    }
    END {
    if ( got1 == “” && got2 == “” ) {
    if ( var2 == 0 && “/” == “/” ) {

Divide-by-zero; make the result simply 0

val = 0;
}
else {
val = var1 / var2;
}
if ( “pct” == “pct” ) {
val = val * 100;
}
if ( val ~ /.[0-9]/ ) {
printf “%.6f\n”, val;
}
else {
print val;
}
}
else {
print got1, got2 | “cat 1>&2”;
exit 1;
}
}
/tmp/pmp-check-mysql-status.khcnvL

  • LEVEL=7.500000
  • [ 0 = 0 -a -n 7.500000 ]
  • NOTE=Threads_connected / max_connections (pct)
  • NOTE=Threads_connected / max_connections (pct) = 7.500000
  • compare_result 7.500000 95 80 >= pct
  • local VAR=7.500000
  • local CRIT=95
  • local WARN=80
  • local CMP=>=
  • local TRAN=pct
  • echo 1
  • awk END {
    if ( “95” != “” ) {
    if ( “pct” == “str” ) {
    if ( “7.500000” >= “95” ) {
    exit 2
    }
    } else {
    if ( 7.500000 >= 95 ) {
    exit 2
    }
    }
    }
    if ( “80” != “” ) {
    if ( “pct” == “str” ) {
    if ( “7.500000” >= “80” ) {
    exit 1
    }
    } else {
    if ( 7.500000 >= 80 ) {
    exit 1
    }
    }
    }
    exit 0
    }
  • NOTE=OK Threads_connected / max_connections (pct) = 7.500000
  • [ pct = pct ]
  • PERFDATA_MAX=100
  • PERFDATA=Threads_connected/max_connections=7.500000;80;95;0;100
  • NOTE=OK Threads_connected / max_connections (pct) = 7.500000 | Threads_connected/max_connections=7.500000;80;95;0;100
  • echo OK Threads_connected / max_connections (pct) = 7.500000 | Threads_connected/max_connections=7.500000;80;95;0;100
  • rm -f /tmp/pmp-check-mysql-status.khcnvL /tmp/pmp-check-mysql-status.n1acml
  • OUTPUT=OK Threads_connected / max_connections (pct) = 7.500000 | Threads_connected/max_connections=7.500000;80;95;0;100
  • EXITSTATUS=3
  • EXITSTATUS=0
  • echo OK Threads_connected / max_connections (pct) = 7.500000 | Threads_connected/max_connections=7.500000;80;95;0;100
    OK Threads_connected / max_connections (pct) = 7.500000 | Threads_connected/max_connections=7.500000;80;95;0;100
  • exit 0
    username@hostname:/usr/lib64/nagios/plugins#
#6

Unfortunately, there are no errors in the output like you posted initially:
awk: line 8: syntax error at or near )
awk: line 13: syntax error at or near if
awk: line 24: syntax error at or near exit

Please re-run the similar sh -x command for debugging purpose once you get the errors with awk to track it down.

#7

Weber,

That’s true. I don’t see the errors anymore if I ran the command manually but I am still getting the same error message If I put the same command into the nrpe_local.cfg (which is on the remote server).

I guess my syntax is NOT right in the cfg file or should I put this command into the monitoring server instead of the remote server?

could you tell me where I should define the command if I should put this command into the monitoring server?

Thanks for your help.
I am really appreciated.

-D

#8

The command like this “pmp-check-mysql-status -l $USER3$ -p $USER4$ -H $HOSTADDRESS$ -x Threads_connected -o / -y max_connections -T pct -w 80 -c 95” should go to the nagios config and nagios replaces those vars with the respective values.

Unanswered | Unsolved | Solved

MySQL, InnoDB, MariaDB and MongoDB are trademarks of their respective owners.
Copyright © 2006 - 2021 Percona LLC. All rights reserved.