# upgrading to PMM 1.1.0 beta **URL:** \ **Category:** PMM 1.x\ **Created:** [February 10, 2017, 2:18pm UTC](https://forums.percona.com/t/upgrading-to-pmm-1-1-0-beta/5408 "2017-02-10T14:18:27Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![govindareddy20](https://avatars.discourse-cdn.com/v4/letter/g/e480ec/32.png) [@govindareddy20](https://forums.percona.com/u/govindareddy20)\ **Post date:** [February 10, 2017, 2:18pm UTC](https://forums.percona.com/t/upgrading-to-pmm-1-1-0-beta/5408/1 "2017-02-10T14:18:27Z")
Hi, I heard that there is new beta version from PMM 1.1.0. I tried to install pmm-client using both yum repository and tarbal package and failed to do so, followed the below links. [url][https://www.percona.com/downloads/TESTING/pmm/[/url]](https://www.percona.com/downloads/TESTING/pmm/%5B/url%5D) [url][https://www.percona.com/doc/percona-monitoring-and-management/1.1.0/install.html#install[/url]](https://www.percona.com/doc/percona-monitoring-and-management/1.1.0/install.html#install%5B/url%5D) Getting the below error from yum: [url][http://repo.percona.com/experimental/2016.09/RPMS/noarch/repodata/repomd.xml:[/url]](http://repo.percona.com/experimental/2016.09/RPMS/noarch/repodata/repomd.xml:%5B/url%5D) [Errno 14] PYCURL ERROR 22 - “The requested URL returned error: 404 Not Found” Trying other mirror. using tarbal: I couldn’t find pmm-client 1.1.0beta as mentioned in the installation document. Can you please redirect me to the correct links where I can get the packages. Thank you. ---
**Author:** ![Mykola](https://sea1.discourse-cdn.com/flex019/user_avatar/forums.percona.com/mykola/32/30_2.png) [@Mykola](https://forums.percona.com/u/Mykola)\ **Post date:** [February 13, 2017, 1:49am UTC](https://forums.percona.com/t/upgrading-to-pmm-1-1-0-beta/5408/2 "2017-02-13T01:49:56Z")
Hi, please don’t use experimental repository, it is for publishing prototypes/proof-of-concept versions, usually experimental binaries never become beta, release candidate or GA version. to get pmm-client-1.1.0-1.beta rpm you need to disable experimental repository and enable testing repository. after that please type the following commands ```auto yum --enablerepo=* clean all yum install pmm-client ``` ---
**Author:** ![govindareddy20](https://avatars.discourse-cdn.com/v4/letter/g/e480ec/32.png) [@govindareddy20](https://forums.percona.com/u/govindareddy20)\ **Post date:** [February 13, 2017, 9:25am UTC](https://forums.percona.com/t/upgrading-to-pmm-1-1-0-beta/5408/3 "2017-02-13T09:25:05Z")
Getting the following error after running the above code given. Loaded plugins: priorities, update-motd, upgrade-helper amzn-main/2016.09 | 2.1 kB 00:00 amzn-main/2016.09/group | 35 kB 00:00 amzn-main/2016.09/primary\_db | 3.5 MB 00:00 amzn-updates/2016.09 | 2.3 kB 00:00 amzn-updates/2016.09/group | 35 kB 00:00 amzn-updates/2016.09/updateinfo | 364 kB 00:00 amzn-updates/2016.09/primary\_db | 565 kB 00:00 datadog | 2.5 kB 00:00 datadog/primary\_db | 110 kB 00:00 [url][http://repo.percona.com/experimental/2016.09/RPMS/noarch/repodata/repomd.xml:[/url]](http://repo.percona.com/experimental/2016.09/RPMS/noarch/repodata/repomd.xml:%5B/url%5D) [Errno 14] PYCURL ERROR 22 - “The requested URL returned error: 404 Not Found” Trying other mirror. One of the configured repositories failed (Percona-Experimental YUM repository - noarch), and yum doesn’t have enough cached data to continue. At this point the only safe thing yum can do is fail. There are a few ways to work “fix” this: 1. Contact the upstream for the repository and get them to fix the problem. 2. Reconfigure the baseurl/etc. for the repository, to point to a working upstream. This is most often useful if you are using a newer distribution release than is supported by the repository (and the packages for the previous distribution release still work). 3. Disable the repository, so yum won’t use it by default. Yum will then just ignore the repository until you permanently enable it again or use –enablerepo for temporary usage: yum-config-manager --disable percona-experimental-noarch 1. Configure the failing repository to be skipped, if it is unavailable. Note that yum will try to contact the repo. when it runs most commands, so will have to try and fail each time (and thus. yum will be be much slower). If it is a very temporary problem though, this is often a nice compromise: yum-config-manager --save --setopt=percona-experimental-noarch.skip\_if\_unavailable=true failure: repodata/repomd.xml from percona-experimental-noarch: [Errno 256] No more mirrors to try. ---
**Author:** ![Mykola](https://sea1.discourse-cdn.com/flex019/user_avatar/forums.percona.com/mykola/32/30_2.png) [@Mykola](https://forums.percona.com/u/Mykola)\ **Post date:** [February 13, 2017, 10:12am UTC](https://forums.percona.com/t/upgrading-to-pmm-1-1-0-beta/5408/4 "2017-02-13T10:12:27Z")
Hi govindareddy20, please disable experimental repository ☹ it is dangerous, you can install fully untested software from it !! you can disable experimental repo with the following commands ```auto yum-config-manager --disable percona-experimental-x86_64 yum-config-manager --disable percona-experimental-noarch ``` You can install pmm-client with the following commands ```auto yum --enablerepo=* clean all yum install --enablerepo=percona-testing-x86_64 pmm-client ``` NB: code in testing repository has BETA quality