# SST parallel not working **URL:** \ **Category:** Percona XtraDB Cluster 5.x\ **Created:** [September 28, 2015, 1:59am UTC](https://forums.percona.com/t/sst-parallel-not-working/4420 "2015-09-28T01:59:09Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![agutierrez](https://sea1.discourse-cdn.com/flex019/user_avatar/forums.percona.com/agutierrez/32/1090_2.png) [@agutierrez](https://forums.percona.com/u/agutierrez)\ **Post date:** [September 28, 2015, 1:59am UTC](https://forums.percona.com/t/sst-parallel-not-working/4420/1 "2015-09-28T01:59:09Z")
Hi, We have two nodes percona xtradb cluster with one arbiter. We have configured in my.cnf with this settings: [xtrabackup] compress parallel=6 When cluster transfer SST, only transfer in one thread and not in 6. Server version: 5.6.21-70.1-56-log Percona XtraDB Cluster (GPL), Release rel70.1, Revision 938, WSREP version 25.8, wsrep\_25.8.r4150 Anybody with this behavior? Best regards. ---
**Author:** ![mirfan](https://sea1.discourse-cdn.com/flex019/user_avatar/forums.percona.com/mirfan/32/16890_2.png) [@mirfan](https://forums.percona.com/u/mirfan)\ **Post date:** [September 29, 2015, 4:01am UTC](https://forums.percona.com/t/sst-parallel-not-working/4420/2 "2015-09-29T04:01:09Z")
Can you please share mysql error log from donor and joiner and along with that backup log to check further. Also, what version of Xtrabackup you are using ? $ xtrabackup --version ---
**Author:** ![agutierrez](https://sea1.discourse-cdn.com/flex019/user_avatar/forums.percona.com/agutierrez/32/1090_2.png) [@agutierrez](https://forums.percona.com/u/agutierrez)\ **Post date:** [October 7, 2015, 2:12am UTC](https://forums.percona.com/t/sst-parallel-not-working/4420/3 "2015-10-07T02:12:18Z")
HI Mirfan, Thanks for your help xtrabackup version is the same on the two nodes: ```auto xtrabackup version 2.2.12 based on MySQL server 5.6.24 Linux (x86_64) (revision id: 8726828) ``` Node1 (donor) Log ```auto 2015-09-16 16:44:30 14094 [Note] WSREP: SSL handshake successful, remote endpoint ssl://1X8.1X5.1X3.2X9:50283 local endpoint ssl://8X.9X.2X3.X2:4567 cipher: AES128-SHA compression: zlib compression 2015-09-16 16:44:30 14094 [Note] WSREP: (4c54e5cb, 'ssl://0.0.0.0:4567') address 'ssl://8X.9X.2X3.X2:4567' pointing to uuid 4c54e5cb is blacklisted, skipping 2015-09-16 16:44:30 14094 [Note] WSREP: (4c54e5cb, 'ssl://0.0.0.0:4567') address 'ssl://8X.9X.2X3.X2:4567' pointing to uuid 4c54e5cb is blacklisted, skipping 2015-09-16 16:44:30 14094 [Note] WSREP: (4c54e5cb, 'ssl://0.0.0.0:4567') address 'ssl://8X.9X.2X3.X2:4567' pointing to uuid 4c54e5cb is blacklisted, skipping 2015-09-16 16:44:30 14094 [Note] WSREP: (4c54e5cb, 'ssl://0.0.0.0:4567') turning message relay requesting on, nonlive peers: 2015-09-16 16:44:30 14094 [Note] WSREP: declaring 48d0060e at ssl://1X8.32.2X4.17:4567 stable 2015-09-16 16:44:30 14094 [Note] WSREP: declaring 70b10eaa at ssl://1X8.1X5.1X3.2X9:4567 stable 2015-09-16 16:44:30 14094 [Note] WSREP: (4c54e5cb, 'ssl://0.0.0.0:4567') address 'ssl://8X.9X.2X3.X2:4567' pointing to uuid 4c54e5cb is blacklisted, skipping 2015-09-16 16:44:30 14094 [Note] WSREP: (4c54e5cb, 'ssl://0.0.0.0:4567') address 'ssl://8X.9X.2X3.X2:4567' pointing to uuid 4c54e5cb is blacklisted, skipping 2015-09-16 16:44:30 14094 [Note] WSREP: (4c54e5cb, 'ssl://0.0.0.0:4567') address 'ssl://8X.9X.2X3.X2:4567' pointing to uuid 4c54e5cb is blacklisted, skipping 2015-09-16 16:44:30 14094 [Note] WSREP: (4c54e5cb, 'ssl://0.0.0.0:4567') address 'ssl://8X.9X.2X3.X2:4567' pointing to uuid 4c54e5cb is blacklisted, skipping 2015-09-16 16:44:30 14094 [Note] WSREP: Node 48d0060e state prim 2015-09-16 16:44:30 14094 [Note] WSREP: view(view_id(PRIM,48d0060e,1510) memb { 48d0060e,0 4c54e5cb,0 70b10eaa,0 } joined { } left { } partitioned { }) 2015-09-16 16:44:30 14094 [Note] WSREP: save pc into disk 2015-09-16 16:44:30 14094 [Note] WSREP: New COMPONENT: primary = yes, bootstrap = no, my_idx = 1, memb_num = 3 2015-09-16 16:44:30 14094 [Note] WSREP: STATE EXCHANGE: Waiting for state UUID. 2015-09-16 16:44:30 14094 [Note] WSREP: STATE EXCHANGE: sent state msg: 707090cd-5c81-11e5-8c09-7b24f3bbafa0 2015-09-16 16:44:30 14094 [Note] WSREP: STATE EXCHANGE: got state msg: 707090cd-5c81-11e5-8c09-7b24f3bbafa0 from 0 (garb) 2015-09-16 16:44:30 14094 [Note] WSREP: STATE EXCHANGE: got state msg: 707090cd-5c81-11e5-8c09-7b24f3bbafa0 from 1 (nodo1) 2015-09-16 16:44:30 14094 [Note] WSREP: STATE EXCHANGE: got state msg: 707090cd-5c81-11e5-8c09-7b24f3bbafa0 from 2 (nodo2) 2015-09-16 16:44:30 14094 [Note] WSREP: Quorum results: version = 3, component = PRIMARY, conf_id = 544, members = 2/3 (joined/total), act_id = 10972359, last_appl. = 0, protocols = 0/6/3 (gcs/repl/appl), group UUID = 52715674-b8c9-11e3-8f0f-265b2adb500e 2015-09-16 16:44:30 14094 [Note] WSREP: Flow-control interval: [28, 28] 2015-09-16 16:44:30 14094 [Note] WSREP: New cluster view: global state: 52715674-b8c9-11e3-8f0f-265b2adb500e:10972359, view# 545: Primary, number of nodes: 3, my index: 1, protocol version 3 2015-09-16 16:44:30 14094 [Note] WSREP: wsrep_notify_cmd is not defined, skipping notification. 2015-09-16 16:44:30 14094 [Note] WSREP: REPL Protocols: 6 (3, 2) 2015-09-16 16:44:30 14094 [Note] WSREP: Service thread queue flushed. 2015-09-16 16:44:30 14094 [Note] WSREP: Assign initial position for certification: 10972359, protocol version: 3 2015-09-16 16:44:30 14094 [Note] WSREP: Service thread queue flushed. 2015-09-16 16:44:31 14094 [Note] WSREP: Member 2.0 (nodo2) requested state transfer from '*any*'. Selected 1.0 (nodo1)(SYNCED) as donor. 2015-09-16 16:44:31 14094 [Note] WSREP: Shifting SYNCED -> DONOR/DESYNCED (TO: 10972366) 2015-09-16 16:44:31 14094 [Note] WSREP: wsrep_notify_cmd is not defined, skipping notification. 2015-09-16 16:44:31 14094 [Note] WSREP: Running: 'wsrep_sst_xtrabackup-v2 --role 'donor' --address '1X8.1X5.1X3.2X9:4444/xtrabackup_sst//1' --auth 'sstuser:sstpass' --socket '/var/run/mysqld/mysqld.sock' --datadir '/var/lib/mysql/' --defaults-file '/etc/mysql/my.cnf' '' --gtid '52715674-b8c9-11e3-8f0f-265b2adb500e:10972366'' 2015-09-16 16:44:31 14094 [Note] WSREP: sst_donor_thread signaled with 0 WSREP_SST: [INFO] Streaming with xbstream (20150916 16:44:31.597) WSREP_SST: [INFO] Using socat as streamer (20150916 16:44:31.599) WSREP_SST: [INFO] Using /tmp/tmp.y1Eb2DPFhI as innobackupex temporary directory (20150916 16:44:31.780) WSREP_SST: [INFO] Streaming GTID file before SST (20150916 16:44:31.785) WSREP_SST: [INFO] Evaluating xbstream -c ${INFO_FILE} | socat -u stdio TCP:1X8.1X5.1X3.2X9:4444; RC=( ${PIPESTATUS[@]} ) (20150916 16:44:31.787) WSREP_SST: [INFO] Sleeping before data transfer for SST (20150916 16:44:31.807) 2015-09-16 16:44:33 14094 [Note] WSREP: (4c54e5cb, 'ssl://0.0.0.0:4567') turning message relay requesting off WSREP_SST: [INFO] Streaming the backup to joiner at 1X8.1X5.1X3.2X9 4444 (20150916 16:44:41.813) WSREP_SST: [INFO] Evaluating innobackupex --defaults-file=/etc/mysql/my.cnf --no-version-check $tmpopts $INNOEXTRA --galera-info --stream=$sfmt $itmpdir 2>${DATA}/innobackup.backup.log | socat -u stdio TCP:1X8.1X5.1X3.2X9:4444; RC=( ${PIPESTATUS[@]} ) (20150916 16:44:41.816) WSREP_SST: [INFO] Total time on donor: 0 seconds (20150916 16:53:19.530) WSREP_SST: [INFO] Cleaning up temporary directories (20150916 16:53:19.532) 2015-09-16 16:53:19 14094 [Note] WSREP: 1.0 (nodo1): State transfer to 2.0 (nodo2) complete. 2015-09-16 16:53:19 14094 [Note] WSREP: Shifting DONOR/DESYNCED -> JOINED (TO: 10973114) 2015-09-16 16:53:19 14094 [Note] WSREP: Member 1.0 (nodo1) synced with group. 2015-09-16 16:53:19 14094 [Note] WSREP: Shifting JOINED -> SYNCED (TO: 10973114) 2015-09-16 16:53:19 14094 [Note] WSREP: Synchronized with group, ready for connections 2015-09-16 16:53:19 14094 [Note] WSREP: wsrep_notify_cmd is not defined, skipping notification. 2015-09-16 17:02:18 14094 [Note] WSREP: 2.0 (nodo2): State transfer from 1.0 (nodo1) complete. ``` ---
**Author:** ![agutierrez](https://sea1.discourse-cdn.com/flex019/user_avatar/forums.percona.com/agutierrez/32/1090_2.png) [@agutierrez](https://forums.percona.com/u/agutierrez)\ **Post date:** [October 7, 2015, 2:14am UTC](https://forums.percona.com/t/sst-parallel-not-working/4420/4 "2015-10-07T02:14:28Z")
Node2 (Joiner) Log ```auto 2015-09-16 16:44:31 0 [Note] WSREP: wsrep_start_position var submitted: '00000000-0000-0000-0000-000000000000:-1' 2015-09-16 16:44:31 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details). 2015-09-16 16:44:31 5891 [Note] WSREP: Read nil XID from storage engines, skipping position init 2015-09-16 16:44:31 5891 [Note] WSREP: wsrep_load(): loading provider library '/usr/lib/libgalera_smm.so' 2015-09-16 16:44:31 5891 [Note] WSREP: wsrep_load(): Galera 3.8(rf6147dd) by Codership Oy loaded successfully. 2015-09-16 16:44:31 5891 [Note] WSREP: CRC-32C: using "slicing-by-8" algorithm. 2015-09-16 16:44:31 5891 [Warning] WSREP: Could not open saved state file for reading: /var/lib/mysql//grastate.dat 2015-09-16 16:44:31 5891 [Note] WSREP: Found saved state: 00000000-0000-0000-0000-000000000000:-1 2015-09-16 16:44:31 5891 [Note] WSREP: Passing config to GCS: base_host = 1X8.1X5.1X3.2X9; base_port = 4567; cert.log_conflicts = no; debug = no; evs.auto_evict = 0; evs.delay_margin = PT1S; evs.delayed_keep_period = PT30S; evs.inactive_check_period = PT0.5S; evs.inactive_timeout = PT15S; evs.join_retrans_period = PT1S; evs.max_install_timeouts = 3; evs.send_window = 4; evs.stats_report_period = PT1M; evs.suspect_timeout = PT5S; evs.user_send_window = 2; evs.view_forget_timeout = PT24H; gcache.dir = /var/lib/mysql/; gcache.keep_pages_size = 0; gcache.mem_size = 0; gcache.name = /var/lib/mysql//galera.cache; gcache.page_size = 128M; gcache.size = 128M; gcs.fc_debug = 0; gcs.fc_factor = 1.0; gcs.fc_limit = 16; gcs.fc_master_slave = no; gcs.max_packet_size = 64500; gcs.max_throttle = 0.25; gcs.recv_q_hard_limit = 9223372036854775807; gcs.recv_q_soft_limit = 0.25; gcs.sync_donor = no; gmcast.segment = 0; gmcast.version = 0; pc.announce_timeout = PT3S; pc.checksum = false; pc.ignore_quorum = false; pc.ignore_sb = false; pc.npvo = false; pc.reco 2015-09-16 16:44:31 5891 [Note] WSREP: Service thread queue flushed. 2015-09-16 16:44:31 5891 [Note] WSREP: Assign initial position for certification: -1, protocol version: -1 2015-09-16 16:44:31 5891 [Note] WSREP: wsrep_sst_grab() 2015-09-16 16:44:31 5891 [Note] WSREP: Start replication 2015-09-16 16:44:31 5891 [Note] WSREP: Setting initial position to 00000000-0000-0000-0000-000000000000:-1 2015-09-16 16:44:31 5891 [Note] WSREP: protonet asio version 0 2015-09-16 16:44:31 5891 [Note] WSREP: Using CRC-32C for message checksums. 2015-09-16 16:44:31 5891 [Note] WSREP: initializing ssl context 2015-09-16 16:44:31 5891 [Note] WSREP: backend: asio 2015-09-16 16:44:31 5891 [Warning] WSREP: access file(gvwstate.dat) failed(No such file or directory) 2015-09-16 16:44:31 5891 [Note] WSREP: restore pc from disk failed 2015-09-16 16:44:31 5891 [Note] WSREP: GMCast version 0 2015-09-16 16:44:31 5891 [Note] WSREP: (70b10eaa, 'ssl://0.0.0.0:4567') listening at ssl://0.0.0.0:4567 2015-09-16 16:44:31 5891 [Note] WSREP: (70b10eaa, 'ssl://0.0.0.0:4567') multicast: , ttl: 1 2015-09-16 16:44:31 5891 [Note] WSREP: EVS version 0 2015-09-16 16:44:31 5891 [Note] WSREP: gcomm: connecting to group 'clustername', peer '8X.9X.2X3.X2:,1X8.1X5.1X3.2X9:' 2015-09-16 16:44:31 5891 [Note] WSREP: SSL handshake successful, remote endpoint ssl://1X8.1X5.1X3.2X9:33244 local endpoint ssl://1X8.1X5.1X3.2X9:4567 cipher: AES128-SHA compression: zlib compression 2015-09-16 16:44:31 5891 [Note] WSREP: SSL handshake successful, remote endpoint ssl://1X8.1X5.1X3.2X9:4567 local endpoint ssl://1X8.1X5.1X3.2X9:33244 cipher: AES128-SHA compression: zlib compression 2015-09-16 16:44:31 5891 [Warning] WSREP: (70b10eaa, 'ssl://0.0.0.0:4567') address 'ssl://1X8.1X5.1X3.2X9:4567' points to own listening address, blacklisting 2015-09-16 16:44:31 5891 [Note] WSREP: SSL handshake successful, remote endpoint ssl://8X.9X.2X3.X2:4567 local endpoint ssl://1X8.1X5.1X3.2X9:50283 cipher: AES128-SHA compression: zlib compression 2015-09-16 16:44:31 5891 [Note] WSREP: (70b10eaa, 'ssl://0.0.0.0:4567') address 'ssl://1X8.1X5.1X3.2X9:4567' pointing to uuid 70b10eaa is blacklisted, skipping 2015-09-16 16:44:31 5891 [Note] WSREP: (70b10eaa, 'ssl://0.0.0.0:4567') turning message relay requesting on, nonlive peers: ssl://1X8.32.2X4.17:4567 2015-09-16 16:44:32 5891 [Note] WSREP: gcomm: connected 2015-09-16 16:44:32 5891 [Note] WSREP: Changing maximum packet size to 64500, resulting msg size: 32636 2015-09-16 16:44:32 5891 [Note] WSREP: Shifting CLOSED -> OPEN (TO: 0) 2015-09-16 16:44:32 5891 [Note] WSREP: Opened channel 'clustername' 2015-09-16 16:44:32 5891 [Note] WSREP: Waiting for SST to complete. 2015-09-16 16:44:32 5891 [Note] WSREP: SSL handshake successful, remote endpoint ssl://1X8.32.2X4.17:4567 local endpoint ssl://1X8.1X5.1X3.2X9:47082 cipher: AES128-SHA compression: zlib compression 2015-09-16 16:44:32 5891 [Note] WSREP: (70b10eaa, 'ssl://0.0.0.0:4567') address 'ssl://1X8.1X5.1X3.2X9:4567' pointing to uuid 70b10eaa is blacklisted, skipping 2015-09-16 16:44:32 5891 [Note] WSREP: (70b10eaa, 'ssl://0.0.0.0:4567') address 'ssl://1X8.1X5.1X3.2X9:4567' pointing to uuid 70b10eaa is blacklisted, skipping 2015-09-16 16:44:32 5891 [Note] WSREP: (70b10eaa, 'ssl://0.0.0.0:4567') address 'ssl://1X8.1X5.1X3.2X9:4567' pointing to uuid 70b10eaa is blacklisted, skipping 2015-09-16 16:44:32 5891 [Note] WSREP: declaring 48d0060e at ssl://1X8.32.2X4.17:4567 stable 2015-09-16 16:44:32 5891 [Note] WSREP: declaring 4c54e5cb at ssl://8X.9X.2X3.X2:4567 stable 2015-09-16 16:44:32 5891 [Note] WSREP: Node 48d0060e state prim 2015-09-16 16:44:32 5891 [Note] WSREP: view(view_id(PRIM,48d0060e,1510) memb { 48d0060e,0 4c54e5cb,0 70b10eaa,0 } joined { } left { } partitioned { }) 2015-09-16 16:44:32 5891 [Note] WSREP: save pc into disk 2015-09-16 16:44:32 5891 [Note] WSREP: New COMPONENT: primary = yes, bootstrap = no, my_idx = 2, memb_num = 3 2015-09-16 16:44:32 5891 [Note] WSREP: STATE EXCHANGE: Waiting for state UUID. 2015-09-16 16:44:32 5891 [Note] WSREP: STATE EXCHANGE: sent state msg: 707090cd-5c81-11e5-8c09-7b24f3bbafa0 2015-09-16 16:44:32 5891 [Warning] WSREP: Action message in non-primary configuration from member 1 2015-09-16 16:44:32 5891 [Note] WSREP: STATE EXCHANGE: got state msg: 707090cd-5c81-11e5-8c09-7b24f3bbafa0 from 0 (garb) 2015-09-16 16:44:32 5891 [Note] WSREP: STATE EXCHANGE: got state msg: 707090cd-5c81-11e5-8c09-7b24f3bbafa0 from 1 (nodo1) 2015-09-16 16:44:32 5891 [Note] WSREP: STATE EXCHANGE: got state msg: 707090cd-5c81-11e5-8c09-7b24f3bbafa0 from 2 (nodo2) 2015-09-16 16:44:32 5891 [Note] WSREP: Quorum results: version = 3, component = PRIMARY, conf_id = 544, members = 2/3 (joined/total), act_id = 10972359, last_appl. = -1, protocols = 0/6/3 (gcs/repl/appl), group UUID = 52715674-b8c9-11e3-8f0f-265b2adb500e 2015-09-16 16:44:32 5891 [Note] WSREP: Flow-control interval: [28, 28] 2015-09-16 16:44:32 5891 [Note] WSREP: Shifting OPEN -> PRIMARY (TO: 10972359) 2015-09-16 16:44:32 5891 [Note] WSREP: State transfer required: Group state: 52715674-b8c9-11e3-8f0f-265b2adb500e:10972359 Local state: 00000000-0000-0000-0000-000000000000:-1 2015-09-16 16:44:32 5891 [Note] WSREP: New cluster view: global state: 52715674-b8c9-11e3-8f0f-265b2adb500e:10972359, view# 545: Primary, number of nodes: 3, my index: 2, protocol version 3 2015-09-16 16:44:32 5891 [Warning] WSREP: Gap in state sequence. Need state transfer. 2015-09-16 16:44:32 5891 [Note] WSREP: Running: 'wsrep_sst_xtrabackup-v2 --role 'joiner' --address '1X8.1X5.1X3.2X9' --auth 'sstuser:sstpass' --datadir '/var/lib/mysql/' --defaults-file '/etc/mysql/my.cnf' --parent '5891' '' ' WSREP_SST: [INFO] Streaming with xbstream (20150916 16:44:32.310) WSREP_SST: [INFO] Using socat as streamer (20150916 16:44:32.311) WSREP_SST: [INFO] Evaluating timeout -k 110 100 socat -u TCP-LISTEN:4444,reuseaddr stdio | xbstream -x; RC=( ${PIPESTATUS[@]} ) (20150916 16:44:32.485) 2015-09-16 16:44:32 5891 [Note] WSREP: Prepared SST request: xtrabackup-v2|1X8.1X5.1X3.2X9:4444/xtrabackup_sst//1 2015-09-16 16:44:32 5891 [Note] WSREP: wsrep_notify_cmd is not defined, skipping notification. 2015-09-16 16:44:32 5891 [Note] WSREP: REPL Protocols: 6 (3, 2) 2015-09-16 16:44:32 5891 [Note] WSREP: Service thread queue flushed. 2015-09-16 16:44:32 5891 [Note] WSREP: Assign initial position for certification: 10972359, protocol version: 3 2015-09-16 16:44:32 5891 [Note] WSREP: Service thread queue flushed. 2015-09-16 16:44:32 5891 [Warning] WSREP: Failed to prepare for incremental state transfer: Local state UUID (00000000-0000-0000-0000-000000000000) does not match group state UUID (52715674-b8c9-11e3-8f0f-265b2adb500e): 1 (Operation not permitted) at galera/src/replicator_str.cpp:prepare_for_IST():456. IST will be unavailable. 2015-09-16 16:44:32 5891 [Note] WSREP: Member 2.0 (nodo2) requested state transfer from '*any*'. Selected 1.0 (nodo1)(SYNCED) as donor. 2015-09-16 16:44:32 5891 [Note] WSREP: Shifting PRIMARY -> JOINER (TO: 10972366) 2015-09-16 16:44:32 5891 [Note] WSREP: Requesting state transfer: success, donor: 1 WSREP_SST: [INFO] Proceeding with SST (20150916 16:44:33.199) WSREP_SST: [INFO] Cleaning the existing datadir (20150916 16:44:33.201) ==== Deleting Database Files ==== ``` ---
**Author:** ![agutierrez](https://sea1.discourse-cdn.com/flex019/user_avatar/forums.percona.com/agutierrez/32/1090_2.png) [@agutierrez](https://forums.percona.com/u/agutierrez)\ **Post date:** [October 7, 2015, 2:15am UTC](https://forums.percona.com/t/sst-parallel-not-working/4420/5 "2015-10-07T02:15:08Z")
```auto ==== Deleting Database Files ==== WSREP_SST: [INFO] Evaluating socat -u TCP-LISTEN:4444,reuseaddr stdio | xbstream -x; RC=( ${PIPESTATUS[@]} ) (20150916 16:44:34.122) 2015-09-16 16:44:35 5891 [Note] WSREP: (70b10eaa, 'ssl://0.0.0.0:4567') turning message relay requesting off 2015-09-16 16:53:20 5891 [Note] WSREP: 1.0 (nodo1): State transfer to 2.0 (nodo2) complete. 2015-09-16 16:53:20 5891 [Note] WSREP: Member 1.0 (nodo1) synced with group. WSREP_SST: [INFO] Compressed qpress files found (20150916 16:53:30.772) WSREP_SST: [INFO] Decompression with 8 threads (20150916 16:53:30.775) WSREP_SST: [INFO] Evaluating find /var/lib/mysql/ -type f -name '*.qp' -printf '%p\n%h\n' | xargs -n 2 qpress -T8d (20150916 16:53:30.776) WSREP_SST: [INFO] Removing qpress files after decompression (20150916 16:58:40.900) WSREP_SST: [INFO] Preparing the backup at /var/lib/mysql/ (20150916 16:58:41.027) WSREP_SST: [INFO] Evaluating innobackupex --no-version-check --apply-log $rebuildcmd ${DATA} &>${DATA}/innobackup.prepare.log (20150916 16:58:41.029) WSREP_SST: [INFO] Galera co-ords from recovery: 52715674-b8c9-11e3-8f0f-265b2adb500e:10973103 (20150916 17:02:18.596) WSREP_SST: [INFO] Total time on joiner: 0 seconds (20150916 17:02:18.598) WSREP_SST: [INFO] Removing the sst_in_progress file (20150916 17:02:18.600) 2015-09-16 17:02:18 5891 [Note] WSREP: SST complete, seqno: 10973103 2015-09-16 17:02:18 5891 [Note] Plugin 'FEDERATED' is disabled. 2015-09-16 17:02:18 7f8ecdf2e720 InnoDB: Warning: Using innodb_locks_unsafe_for_binlog is DEPRECATED. This option may be removed in future releases. Please use READ COMMITTED transaction isolation level instead, see http://dev.mysql.com/doc/refman/5.6/en/set-transaction.html. 2015-09-16 17:02:18 5891 [Note] InnoDB: Using atomics to ref count buffer pool pages 2015-09-16 17:02:18 5891 [Note] InnoDB: The InnoDB memory heap is disabled 2015-09-16 17:02:18 5891 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 2015-09-16 17:02:18 5891 [Note] InnoDB: Memory barrier is not used 2015-09-16 17:02:18 5891 [Note] InnoDB: Compressed tables use zlib 1.2.7 2015-09-16 17:02:18 5891 [Note] InnoDB: Using Linux native AIO 2015-09-16 17:02:18 5891 [Note] InnoDB: Not using CPU crc32 instructions 2015-09-16 17:02:18 5891 [Note] InnoDB: Initializing buffer pool, size = 4.0G 2015-09-16 17:02:18 5891 [Note] InnoDB: Completed initialization of buffer pool 2015-09-16 17:02:18 5891 [Note] InnoDB: Highest supported file format is Barracuda. 2015-09-16 17:02:19 5891 [Note] InnoDB: 128 rollback segment(s) are active. 2015-09-16 17:02:19 5891 [Note] InnoDB: Waiting for purge to start 2015-09-16 17:02:19 5891 [Note] InnoDB: Percona XtraDB (http://www.percona.com) 5.6.21-70.1 started; log sequence number 35390587755 2015-09-16 17:02:19 5891 [Warning] No existing UUID has been found, so we assume that this is the first time that this server has been started. Generating a new UUID: ed43a881-5c83-11e5-a03f-020000260fd4. 2015-09-16 17:02:19 5891 [Note] RSA private key file not found: /var/lib/mysql//private_key.pem. Some authentication plugins will not work. 2015-09-16 17:02:19 5891 [Note] RSA public key file not found: /var/lib/mysql//public_key.pem. Some authentication plugins will not work. 2015-09-16 17:02:19 5891 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 2015-09-16 17:02:19 5891 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 2015-09-16 17:02:19 5891 [Note] Server socket created on IP: '0.0.0.0'. 2015-09-16 17:02:19 5891 [Note] Event Scheduler: Loaded 0 events 2015-09-16 17:02:19 5891 [Note] WSREP: Signalling provider to continue. 2015-09-16 17:02:19 5891 [Note] WSREP: inited wsrep sidno 2 2015-09-16 17:02:19 5891 [Note] WSREP: SST received: 52715674-b8c9-11e3-8f0f-265b2adb500e:10973103 2015-09-16 17:02:19 5891 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.6.21-70.1-56-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 Percona XtraDB Cluster (GPL), Release rel70.1, Revision 938, WSREP version 25.8, wsrep_25.8.r4150 2015-09-16 17:02:19 5891 [Note] WSREP: 2.0 (nodo2): State transfer from 1.0 (nodo1) complete. 2015-09-16 17:02:19 5891 [Note] WSREP: Shifting JOINER -> JOINED (TO: 10974013) 2015-09-16 17:03:37 5891 [Note] WSREP: Member 2.0 (nodo2) synced with group. 2015-09-16 17:03:37 5891 [Note] WSREP: Shifting JOINED -> SYNCED (TO: 10974067) 2015-09-16 17:03:40 5891 [Note] WSREP: Synchronized with group, ready for connections ``` ---
**Author:** ![agutierrez](https://sea1.discourse-cdn.com/flex019/user_avatar/forums.percona.com/agutierrez/32/1090_2.png) [@agutierrez](https://forums.percona.com/u/agutierrez)\ **Post date:** [November 13, 2015, 2:59am UTC](https://forums.percona.com/t/sst-parallel-not-working/4420/6 "2015-11-13T02:59:32Z")
Any ideas??