# proxySql v2 setup with 2 nodes

**URL:** <https://forums.percona.com/t/proxysql-v2-setup-with-2-nodes/17842>\
**Category:** Percona XtraDB Cluster\
**Tags:** percona\
**Created:** [October 4, 2022, 5:22pm UTC](https://forums.percona.com/t/proxysql-v2-setup-with-2-nodes/17842 "2022-10-04T17:22:35Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![adi](https://avatars.discourse-cdn.com/v4/letter/a/4da419/32.png) [@adi](https://forums.percona.com/u/adi)\
**Post date:** [October 4, 2022, 5:22pm UTC](https://forums.percona.com/t/proxysql-v2-setup-with-2-nodes/17842/1 "2022-10-04T17:22:35Z")

</div>

Hi Team,  
I have setup 3 node XtraDB 8.0.28 cluster (default ports are changed) and want to setup 2 node proxySQL setup which should be having a virtual IP/load balancer to which application can connect and if even one proxysql node is down application can connect route through another proxysql node using same virtual IP/load balance.  
Request to please guide or point to correct documentation for this scenario.  
Thanks  
Adi

---

<div class="post-metadata">

**Author:** ![Ivan\_Groenewold](https://sea1.discourse-cdn.com/flex019/user_avatar/forums.percona.com/ivan_groenewold/32/6299_2.png) [@Ivan\_Groenewold](https://forums.percona.com/u/Ivan_Groenewold)\
**Post date:** [October 5, 2022, 11:37am UTC](https://forums.percona.com/t/proxysql-v2-setup-with-2-nodes/17842/2 "2022-10-05T11:37:53Z")

</div>

Hello, this topology is often implemented with keepalived. Check out [Setup ProxySQL for High Availability (not a Single Point of Failure) - Percona Database Performance Blog](https://www.percona.com/blog/2017/01/19/setup-proxysql-for-high-availability-not-single-point-failure/)

---

<div class="post-metadata">

**Author:** ![adi](https://avatars.discourse-cdn.com/v4/letter/a/4da419/32.png) [@adi](https://forums.percona.com/u/adi)\
**Post date:** [October 6, 2022, 6:46am UTC](https://forums.percona.com/t/proxysql-v2-setup-with-2-nodes/17842/3 "2022-10-06T06:46:26Z")

</div>

Hi @Ivan_Groenewold,  
Thanks for pointing out to doc will these steps also work for XtraDB 8.0.28 cluster with proxysqlV2 installed using proxysql-admin.  
Thanks  
Aditya

---

<div class="post-metadata">

**Author:** ![Ivan\_Groenewold](https://sea1.discourse-cdn.com/flex019/user_avatar/forums.percona.com/ivan_groenewold/32/6299_2.png) [@Ivan\_Groenewold](https://forums.percona.com/u/Ivan_Groenewold)\
**Post date:** [October 6, 2022, 2:56pm UTC](https://forums.percona.com/t/proxysql-v2-setup-with-2-nodes/17842/4 "2022-10-06T14:56:46Z")

</div>

Yes, it should work for those versions as well