# Percona MySQL RPM Build - issue with numerous NOT FOUND modules **URL:** \ **Category:** Other MySQL® Questions\ **Created:** [April 17, 2014, 1:01am UTC](https://forums.percona.com/t/percona-mysql-rpm-build-issue-with-numerous-not-found-modules/3408 "2014-04-17T01:01:31Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Chern](https://avatars.discourse-cdn.com/v4/letter/c/bcef8e/32.png) [@Chern](https://forums.percona.com/u/Chern)\ **Post date:** [April 17, 2014, 1:01am UTC](https://forums.percona.com/t/percona-mysql-rpm-build-issue-with-numerous-not-found-modules/3408/1 "2014-04-17T01:01:31Z")
Hi, I am new to the rpmbuild process and I’d like to build a RPM (using a rpmbuild) for the Percona MySQL 5.6.16 source codes and I obtained the source from this URL: [url][http://www.percona.com/downloads/[/url]](http://www.percona.com/downloads/%5B/url%5D) → select Percona Server version 5.6 I attempted to execute the RPM build using this command below: rpmbuild -bb percona-server.spec However, from the results of the rpmbuild showed that there are “NOT FOUND” messages for numerous modules such as pthread\_attr\_\*, HAVE\_FLOATING\_H, HAVE\_NDIR\_H, HAVE\_IEEEFP\_H. Sample error messages listed below: – Looking for kqueue - not found – Looking for HAVE\_IEEEFP\_H - not found – Looking for TIOCSTAT - not found – Looking for FIONREAD - not found – Looking for EVFILT\_TIMER - not found – Looking for netinet/in6.h - not found – Looking for mbscmp - not found – Looking for strvis - not found – Looking for strunvis - not found The generated script from the RPM build process produced a “Bad exit status” i.e. “RPM build errors: Bad exit status from /var/tmp/rpm-tmp.iTzX0v (%install)” Could anyone help point out where I can obtain a complete source for 5.6.16 with all dependent modules available? And is there a more efficient to incorporate these modules instead of having to download and install them one at a time? Also for those missing modules above, what is the syntax for including them into the spec file? Thanks very much. ---
**Author:** ![Chern](https://avatars.discourse-cdn.com/v4/letter/c/bcef8e/32.png) [@Chern](https://forums.percona.com/u/Chern)\ **Post date:** [April 17, 2014, 1:05am UTC](https://forums.percona.com/t/percona-mysql-rpm-build-issue-with-numerous-not-found-modules/3408/2 "2014-04-17T01:05:02Z")
Here’s the generated script from the rpmbuild process: #!/bin/sh RPM\_SOURCE\_DIR=“/root/rpmbuild/SOURCES” RPM\_BUILD\_DIR=“/root/rpmbuild/BUILD” RPM\_OPT\_FLAGS=“-O2 -g -pipe -Wall -Wp,-D\_FORTIFY\_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mminimal-toc” RPM\_ARCH=“ppc64” RPM\_OS=“linux” export RPM\_SOURCE\_DIR RPM\_BUILD\_DIR RPM\_OPT\_FLAGS RPM\_ARCH RPM\_OS RPM\_DOC\_DIR=“/usr/share/doc” export RPM\_DOC\_DIR RPM\_PACKAGE\_NAME=“Percona-Server-56” RPM\_PACKAGE\_VERSION=“5.6.16” RPM\_PACKAGE\_RELEASE=“64” export RPM\_PACKAGE\_NAME RPM\_PACKAGE\_VERSION RPM\_PACKAGE\_RELEASE LANG=C export LANG unset CDPATH DISPLAY ||: RPM\_BUILD\_ROOT=“/root/rpmbuild/BUILDROOT/Percona-Server-56-5.6.16-64.ppc64” export RPM\_BUILD\_ROOT PKG\_CONFIG\_PATH=“/usr/lib64/pkgconfig:/usr/share/pkgconfig” export PKG\_CONFIG\_PATH set -x umask 022 cd “/root/rpmbuild/BUILD” [“$RPM\_BUILD\_ROOT” != “/”] && rm -rf “${RPM\_BUILD\_ROOT}” mkdir -p `dirname "$RPM_BUILD_ROOT"` mkdir “$RPM\_BUILD\_ROOT” cd ‘percona-server-5.6.16-64.2’ LANG=C export LANG unset DISPLAY RBR=$RPM\_BUILD\_ROOT MBD=$RPM\_BUILD\_DIR/percona-server-5.6.16-64.2 # Ensure that needed directories exists install -d $RBR/etc/{logrotate.d,init.d} install -d $RBR/var/lib/mysql/mysql install -d $RBR/usr/share/mysql-test install -d $RBR/usr/share/percona-server/SELinux/RHEL4 install -d $RBR/usr/include install -d $RBR/usr/lib64 install -d $RBR/usr/share/man install -d $RBR/usr/sbin install -d $RBR/usr/lib64/mysql/plugin ( cd $MBD/release make DESTDIR=$RBR benchdir\_root=/usr/share install d=“`pwd`” cd $MBD/UDF make DESTDIR=$RBR benchdir\_root=/usr/share install cd “$d” ) # Install all binaries ( cd $MBD/release make DESTDIR=$RBR install ) # FIXME: at some point we should stop doing this and just install everything # FIXME: directly into /usr/lib64/mysql - perhaps at the same time as renaming # FIXME: the shared libraries to use libmysql\*-$major.$minor.so syntax mv -v $RBR//usr/lib64/\*.a $RBR//usr/lib64/mysql/ # Install logrotate and autostart install -m 644 $MBD/release/support-files/mysql-log-rotate $RBR/etc/logrotate.d/mysql install -m 755 $MBD/release/support-files/mysql.server $RBR/etc/init.d/mysql # Delete the symlinks to the libraries from the libdir. These are created by # ldconfig(8) afterwards. rm -f $RBR/usr/lib64/libmysqlclient\*.so.18 # Create a symlink “rcmysql”, pointing to the init.script. SuSE users # will appreciate that, as all services usually offer this. ln -s /etc/init.d/mysql $RBR/usr/sbin/rcmysql # Touch the place where the my.cnf config file might be located # Just to make sure it’s in the file list and marked as a config file touch $RBR/etc/my.cnf # Install SELinux files in datadir install -m 600 $MBD/support-files/RHEL4-SElinux/mysql.{fc,te} $RBR/usr/share/percona-server/SELinux/RHEL4 # Remove man pages we explicitly do not want to package, avoids 'unpackaged # files’ warning. rm -f $RBR/usr/share/man/man1/make\_win\_bin\_dist.1\* ############################################################################## # Post processing actions, i.e. when installed ############################################################################## /usr/lib/rpm/find-debuginfo.sh --strict-build-id “/root/rpmbuild/BUILD/percona-server-5.6.16-64.2” /usr/lib/rpm/check-buildroot /usr/lib/rpm/redhat/brp-compress /usr/lib/rpm/redhat/brp-strip-static-archive /usr/bin/strip /usr/lib/rpm/redhat/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump /usr/lib/rpm/brp-python-bytecompile /usr/lib/rpm/redhat/brp-python-hardlink /usr/lib/rpm/redhat/brp-java-repack-jars