# Grafana webhook to webex

**URL:** <https://forums.percona.com/t/grafana-webhook-to-webex/26127>\
**Category:** Percona Monitoring and Management (PMM)\
**Created:** [October 24, 2023, 6:43am UTC](https://forums.percona.com/t/grafana-webhook-to-webex/26127 "2023-10-24T06:43:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pmmChobo](https://avatars.discourse-cdn.com/v4/letter/p/5f8ce5/32.png) [@pmmChobo](https://forums.percona.com/u/pmmChobo)\
**Post date:** [October 24, 2023, 6:43am UTC](https://forums.percona.com/t/grafana-webhook-to-webex/26127/1 "2023-10-24T06:43:55Z")

</div>

## Description:

[Detailed description of the issue or question]

I want to register a webex webhook contact point in the grafana UI, but 400 Bad Request is popping up.  
Only webhook url and Bearer Token are provided by webex, what additional information should I enter?

Thank you

 ![image](https://us1.discourse-cdn.com/flex019/uploads/percona1/original/2X/f/fa10857d1aae3ca4eb396d34f29862e4947f1a54.jpeg)

## Steps to Reproduce:

[Step-by-step instructions on how to reproduce the issue, including any specific settings or configurations]

## Version:

[Insert the version number of the software]

## Logs:

[If applicable, include any relevant log files or error messages]

## Expected Result:

[What the user expected to see or happen before the issue occurred]

## Actual Result:

[What actually happened when the user encountered the issue]

## Additional Information:

[Include any additional information that could be helpful to diagnose the issue, such as browser or device information]

---

<div class="post-metadata">

**Author:** ![matthewb](https://sea1.discourse-cdn.com/flex019/user_avatar/forums.percona.com/matthewb/32/34_2.png) [@matthewb](https://forums.percona.com/u/matthewb)\
**Post date:** [October 24, 2023, 3:22pm UTC](https://forums.percona.com/t/grafana-webhook-to-webex/26127/2 "2023-10-24T15:22:30Z")

</div>

You should enter the full webhook URL provided to you by WebEx. They will generate a custom URL, with your specific credentials. Put that into PMM generic webhook. If the test fails, you will need to examine the PMM logs, and/or examine your WebEx logs and see where the failure is happening.

Use [https://webhook.site/](https://webhook.site/) to do basic troubleshooting and to see what the full payload is from PMM.