# Can't add a backup storage

**URL:** <https://forums.percona.com/t/cant-add-a-backup-storage/38797>\
**Category:** Percona Everest\
**Created:** [July 23, 2025, 2:45pm UTC](https://forums.percona.com/t/cant-add-a-backup-storage/38797 "2025-07-23T14:45:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![eprevost](https://avatars.discourse-cdn.com/v4/letter/e/ed655f/32.png) [@eprevost](https://forums.percona.com/u/eprevost)\
**Post date:** [July 23, 2025, 2:45pm UTC](https://forums.percona.com/t/cant-add-a-backup-storage/38797/1 "2025-07-23T14:45:53Z")

</div>

Hi,  
I’m starting to do some tests with Percona Everest 1.8.0 on a a local minikube Kubernetes cluster. I installed minio in my cluster to test backups. When I try to add a backup storage in Everest console, nothing happens when I click the “add” button. The button turns from blue to gray for a few seconds and then turn back blue. No error message displayed.

What can be the issue? Is there some log I can check somewhere?

Thank you

---

<div class="post-metadata">

**Author:** ![eprevost](https://avatars.discourse-cdn.com/v4/letter/e/ed655f/32.png) [@eprevost](https://forums.percona.com/u/eprevost)\
**Post date:** [July 23, 2025, 3:33pm UTC](https://forums.percona.com/t/cant-add-a-backup-storage/38797/2 "2025-07-23T15:33:30Z")

</div>

Finally, I found the issue. I had to enable the option forceParthStyle